Description

LWR SERIES | 35U x 19″D Wall Mount Rack/Cabinet

Heavy-duty sectional wall rack features a front mounting section that swings open from its backbox, allowing easy access to cables and equipment. The welded 16-gauge steel rack features fully-gusseted corners and a triple-formed wrap design that mounts to the backbox with positive-locking, spring-loaded L-pins. A roller closure keeps the front closed without mandatory locking. Optional front door, order separately.

Features:

• Backbox: 5.80 in. deep with keyhole mounting slots on 16 in. centers, center opening to mount over electrical pull boxes, grounding stud, embossed dimples on back plane for installation of board-mounted accessories, laser-cut knockout panels on top/bottom, and two keyed side locks.
• Front Mounting Section: Fully-gusseted corners, triple-formed wrap design mounts to backbox from inside with two heavy duty spring-loaded L-pins (self seating, positive locking).
• Welded sides with vents
• Beveled front corners
• Knockouts for wireless antennas
• One-pair adjustable mounting rails tapped 10-32, printed RU scale
• Integral top/bottom rails on EIA spacing for mounting or lacing
• Black-textured powder-coat finish
• Pilot point screws with captive washers
• Draw latch to pull mounting section and backbox together
• Grounding stud

Specifications:

• Rack Space:  35U
• Height:  67.375 in.
• Width:  23.06 in.
• Depth:  19.05 in. (16 usable)
• Load Capacity: 300 lbs.

Spec Sheet:

https://eadn-wc04-8440053.nxedge.io/wp-content/uploads/2490-LWR-Series.pdf?v=1764102799